Davco CT-800 Ceramic Tile Cleaner (1L, 4L, 20L)
Brand : Davco by Sika
Product Type : Tile, grout and masonry cleaner
Size : 1 Litre, 4 Litres, 20 Litres
Density : ~1.16 kg/L
pH-Value : 2 - 3
Product Description:
Davco Ceramic Tile Cleaner 800 is a general purpose cleaner designed for routine maintenance of showers, bathrooms and other tile / stone / masonry installations. It safely and easily removes mold and mildew, as well as mineral deposits, hardwater and rust stains.
Usage:
- Ideal for stripping grout haze, cement / mortars smears and efflorescence from new and renovated construction. Suitable for interior or exterior use over vertical or horizontal surfaces. Provides extra strength for industrial / institutional demand and dilutes with water.
- Area to use :
- Ceramic tile and mosaic
- Glass block, glass shower door
- Unpolished marble and granite
- Concrete block
- Grout joint
- Vanity, counter top, tub, shower
- Brick and masonry
- Metal fixture
- Concrete
- Fiberglass
Features / Advantages:
- Easy to use
- Fast acting
- Safe and economical
Shelf Life:
- 12 months from the date of production
Storage:
- Store properly in original, unopened and undamaged packaging in dry conditions. Protect from direct sunlight.
Application Guide:
Ratio Davco Ceramic Tile Cleaner 800 : water (by volume)
- Normal cleaning - 1:3
- Unpolished marble / limestone - 1:3
- Granite, brick or masonry concrete - 1:2
- Heavy soil, stains, mineral deposits - 1:1
- Mold / mildew removal - 1:1
Application Steps:
Step 1 : Mixing
Pour Davco Ceramic Tile Cleaner 800 into a clean plastic pail or mixing container. Measure approximately the volume of water needed. Add water and stir for a minute or until uniform.
Step 2 :
Before application, use a small test area to verify compatibility and results in an inconspicuous area, put 2–3 drops of Davco Ceramic Tile Cleaner 800 on the surface with clean water and let dry.
Examine surface for discoloration / shadding, staining, dulling, etching or other problems.
Step 3 :
Apply over surface to be cleaned with pump spray, sponge, brush, mop, roller or rag. Use stiff brush, broom or scrub pad to clean rough / badly soiled surfaces, satins or cement smears.
Step 4 :
Flush or mop twice with clean water. Change mop water frequently. Use broom, squeegee, wet vacuum, mop or sponge to remove rinse water. Repeat steps for stubborn stains, heavy soil or old / thick cement smears.
Step 5 : CLEANING
Rinse/clean all tools and equipment with lots of water.
