Davcogrout (3.5kg)
Brand : Davco by Sika
Product Type : Floor and wall tile joint filler
Size : 3.5kg
Colour : Refer to product image (only for reference, not accurate due to screen colour differences)
Product Description:
Davcogrout is a cementitious tile grout with chemical additives and fillers, specifically designed for filling the joints between tiles or natural stones. Davcogrout is available in various colors (refer to image - only for reference, not accurate due to screen colour differences).
Usage:
As a filler for joints between tiles or natural stones, in both interior and exterior applications. For exterior application, mix Davcogrout with Davco Grout Admix Plus RL 1000 instead of water.
Features / Advantages:
- User friendly
- Easy application and clean up
- Available in various colours
- Easy maintenance
- Water resistant
Shelf Life:
- 6 months from the date of production
Storage:
- Store properly in dry conditions, in undamaged and unopened, original sealed packaging.
Application Guide:
- Mixing ratio : 1.16 L of water or Davco Grout Admix Plus RL 1000 per 3.5 kg bag
Application Steps:
Step 1 :
Pour clean water or Davco Grout Admix Plus RL 1000 into a clean mixing container. Then, add Davcogrout.
Step 2 :
Mix continuously in circular motion using low-speed mechanical mixer until a lump-free, creamy consistency and uniform paste is observed. No extra water should be added.
Step 3 :
Work in small areas at a time.
With the aid of a rubber grout float, compress the mixture into tile joints. Work diagonally to avoid lifting the grout.
Ensure that tile joints are fully compacted with grout, as air voids will cause the grout to sink or crack.
Step 4 :
When the grout joints are firm (slightly hardenend), polish the tile surface in circular motion with a clean, damp cloth to remove excessive Davcogrout. Repeat this process until the tile surface clean.
Step 5 :
Allow the grout to cure for at least 48 hours before allowing traffic over it. Setting may be delayed on dense or impervious surface.
Step 6 : Cleaning
Clean all tools and application equipments with clean water immediately after use. Hardened or cured material can only be removed mechanically.
