top of page

Pentens EB-60 Epoxy Bonding Adhesive Resin (700g+350g)

Brand : Pentens

Product Code : EB-60

Product Type : Solvent free Thixotropic Bonding Adhesive

Colour : Grey / Light Grey (Paste)

Size : 700g + 350g

 

Application Usage :

  • As adhesive for bonding reinforcement, adhesive mortar to:

    • Concrete, stone, steel, epoxy

  • For structural bonding of:

    • Steel plates to concrete, concrete elements, bridge segments

  • For anchoring of:

    • Starter bars, wall anchors

  • For vertical and overhead filling of:

    • Holes, dimensional inaccuracies, etc.

 

Product Description:

 

PENTENS EB-60 provides seamless bonding, delivering durable, long-lasting results that enhance the strength and reliability of your constructions. It is an innovative, solvent-free, thixotropic adhesive that combines strong performance with environmental friendliness. 

Features / Advantages:

  • Can be applied to damp concrete surfaces

  • Solvent free

  • Rapid curing

  • High compressive strength

  • High mechanical strength

  • High abrasion resistance

  • Shrinkage-free curing

  • Easy to apply

 

Application Tools:

  • Trowel

  • Spatula

 

Application Guide:

STEP 1: Substrate Preparation

  • Concrete: Clean, dry, free of oil/grease and loose particles. Concrete age must be 3–6 weeks. Prepare by blast-cleaning, scabbling, or grinding.

 

  • Timber: Clean, free of grease/oil and loose particles. Prepare by blast-cleaning or grinding.
     

  • Steel: Clean, free of grease, oil, rust, scale, and rolling skin. Prepare by sandblasting and avoid condensation. If not bonded immediately, apply one coat of PENTENS E-008 epoxy primer (~0.3 kg/m²) to prevent corrosion.
     

  • Surfaces must be level, with steps or formwork marks ≤ 0.5 mm. Remove dust with an industrial vacuum.
     

STEP 2: Mixing

  • Stir component A in its original container. Add component B to component A.
     

  • Mix with a low-speed electric hand mixer (≤500 rpm) for ~1 minute until uniform. Avoid air entrapment.
     

  • Pot life begins when A and B are mixed; it is shorter at high temperatures and longer at low temperatures. Mix smaller portions for extended workability, or chill components before mixing.
     

STEP 3: Mixing Ratio

  • Maintain a 2:1 ratio by weight (A:B). Always weigh components accurately for correct performance.

Related Products

bottom of page