TOA Supertech - Interior (7L & 18L)
Brand : TOA Paint
Category : Water Base Interior Paint
Sizes : 7 Litres, 18 Litres
Appearance : Matt Finish
Application : Interior
Recommended Uses : Suitable for new or previously painted masonry surfaces such as brickwork, plaster, cement, rendering and asbestos.
Product Specification
SUPERTECH is a specially formulated emulsion paint for interior walls. It is easy to apply and provides attractive matt finishing on walls, asbestos, gypsum boards and bricks.
To check out full catalogue, click on the link below:
https://toagroup.com.my/wp-content/uploads/2022/09/ecatalogue_supertech.pdf
Application Method
- Application methods: Brush, roller or air spray
- Mixing Ratio (by volume): The paint is ready for use after thorough stirring For sealing new or bare surface thin up to 5% with clean water
- Thinner / Cleaner: Clean Water
- Dry to Touch: 15 – 30 min., depending on ambient temperature
- Dry to Overcoat: 1–2hours
- Spreading Rate: 8 – 10 m2 / Litre
- Wet Film Thickness: 85μ
- Dry Film Thickness: 30μ
Surface Preparation
- New and Bare Surfaces
- New plastered surfaces must be allowed to dry thoroughly at least 28 days or less than 12% moisture content as measured with a moisture meter.
- All surfaces to be painted must be sound, dry, clean and free from oil, grease, dirt, mildew, releasing agent, curing compounds and other foreign bodies.
- Previously Painted Surfaces
- All loose or defective paint or powdery residues shall be thoroughly rubbed down by using suitable abrasive paper and dusted off or high pressure water jet, if applicable.
- Make good any surface imperfection with suitable putty or filler.
- Ensure surface is dry, clean, and free from dirt, grease or wax prior to application of paint.
** Note : The paint catalogue is for illustration purposes only. Colours may appear differently due to variations in device displays. Please refer to the physical catalogue for accurate colour representation.
