Sika® AnchorFix 3030 | High Performance Anchoring Adhesive (585ml)
Brand : Sika
Product Type : Epoxy, high-performance, chemical anchoring adhesive
Size : 585ml
Packaging : 12 cartridges per box
Color : Light Grey (Part A: off white , Part B: grey)
Composition : Epoxy resin
Density : 1.5 kg/L (parts A+B mixed)
Product Description:
Sika AnchorFix®-3030 is a two-part, thixotropic, high-performance epoxy anchoring adhesive. It is used for anchoring threaded rods and reinforcing bars in both cracked and uncracked, dry and damp concrete.
Usage:
Sika AnchorFix®-3030 is used as an anchoring adhesive for fixing non-expanding anchors in the following substrates:
- Concrete
- Cracked or uncracked concrete
- Wood
- Natural stone
- Reconstituted or cast stone
- Solid rock
Sika AnchorFix®-3030 is used as an anchoring adhesive for fixing non-expanding anchors in the following objects:
- Threaded rods
- Reinforcing steel
- Bolts and special fastening systems
Sika AnchorFix®-3030 is used for the following application areas:
- Around window and door frames
- Handrails, balustrades and supports
- Railings
Features / Advantages:
- Suitable for use in dry, wet, and water-filled holes
- ETA based on working life of 50 years or 100 years
- Long open time
- Very good load capacity
- ETA to EAD 330499-01-0601 for anchoring in uncracked concrete
- ETA to EAD 330087-01-0601 for post installed rebar connections
- ETA to TR 069 for bond splitting
- Seismic testing C1 and C2 available
- Suitable for contact with drinking water
- High fire resistance
- Styrene-free
- Good adhesion to the substrate
- No shrinkage after curing
- Low wastage
- Seismic testing for post installed rebars
- Fire exposure testing F240 for rebars
- Can be used in hammer-drilled, dustless-drilled and diamond-core-drilled bore holes
Shelf Life:
24 months from date of production
Storage Conditions:
Stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Protect the Product from direct sunlight.
Application Guide:
- Mixing Ratio : Part A : Part B (3 : 1 by volume)
- Layer Thickness : 8mm
- Sag Flow : Non-sag, even overheated
- Product Temperature : Max:+40 °C, Min+10 °C
Application Steps:
Step 1 : Testing
Anchors in solid masonry or concrete:
- Make sure the drill hole diameter is same as anchor size.
- Drill a hole.
Step 2 : Mixing
Use oil-free compressors - Clean the drill hole with an air lance starting from the bottom of the hole. (The hole must be cleaned a minimum of two times until return air stream is free of dust).
Step 3 :
Thoroughly clean the drill hole with steel brush
Step 4 :
Use oil-free compressors - Clean the drill hole with an air lance - starting from the bottom of the hole.
Step 5 :
Pump the product until both parts come out uniformly. Release the gun pressure and clean the cartridge nozzle with a cloth.
Do not entrap air into the hole. Inject the product into the hole starting from the bottom while slowly drawing back the static mixer.
Step 6 :
The anchor must be placed within the open time. Insert the anchor with a rotary motion into the filled drill hole.
Step 7 :
Do not load or move the anchor during the hardening time.
