Sika AnchorFix® S | Universal Anchoring Adhesive (300ml)
Brand : Sika
Product Type : Universal anchoring adhesive
Color : Light Grey (Part A: white , Part B: black)
Packaging :
- Size : 300ml (490g)
- 12 cartridges per box
- 75 boxes per pallet
Density : ~1.7 kg/l (component A+B mixed)
Product Description:
Sika AnchorFix-S is a styrenated polyester based 2-component anchoring adhesive..
Usage:
As a fast curing anchoring adhesive for all grades of :
- Rebars / reinforcing steel
- Threaded rods
- Bolts and special fastening systems
In the following substrates :
- Concrete
- Hollow and solid masonry
- Hard natural stone*
- Solid rock*
* These substrates vary greatly in strength, composition and porosity. Therefore, Sika AnchorFix® S adhesive should be tested if suitable for each application by applying it to a sample area. Check bond strength, surface staining and discoloration.
Features / Advantages:
- Fast curing
- Non-sag, even overhead
- ETA for anchoring in uncracked concrete
- Low wastage
Shelf Life:
12 months from date of production
All Sika AnchorFix® S cartridges have the expiry date printed on the label.
Storage Conditions:
Stored properly in original, unopened, sealed and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C. Protect from direct sunlight.
Application Guide:
- Mixing Ratio : Component A : component B = 10 : 1 by volume
- Layer Thickness : 3mm max
- Sag Flow : Non-sag, even overheated
- Product Temperature : Max:+40 °C, Min+5 °C
- Service Temperature :
- -40 °C min. / +50 °C max. (long term)
- +80 °C (short term 1-2 hours)
- Compressive Strength : ~74 N/mm2 (7 days, +20 °C)
- Compression Elasticity : ~3 100 N/mm2 (7 days, +20 °C)
- Tensile Strength : ~12 N/mm2 (7 days, +20 °C)
Application Steps:
Step 1 : Unscrew the cap
Step 2 : Cut the film
Step 3 : Screw on the static mixer
Step 4 : Place the cartridge into the gun and start application
