Sika® Brushcoat-WP
Brand : Sika
Product Type : Cementitious Waterproofing Slurry
Size : 22.5kg set
- Part A : 4.5kg container (White liquid colour)
- Part B : 18kg bag (Grey powder colour)
Product Description:
Sika® Brushcoat-WP is a cementitious two part polymer-modified product which is mixed to a slurry consistency and applied to concrete and mortar to provide waterproofing.
- Pre-batched components
- Mixes and applies easily
- Slurry or trowellable consistency
Usage:
Sika® Brushcoat-WP will bridge pre-existing static hair-line cracks and is effective for waterproofing the following areas:
- Terraces and balconies
- RC gutters
- Bathroom floors and walls
- Planter boxes
Features / Advantages:
- Pre-batched components
- Mixes and applies easily
- Slurry or trowellable consistency
- Good adhesion to sound substrates
- Waterproofs and damp proofs masonry surfaces
Shelf Life:
- 6 months from the date of production
Storage:
- Store properly in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Protect from direct sunlight, rain and water.
Application Guide:
Application Tools:
- By trowel or spraying.
Pot Life:
- 30 minutes at 30 °C (maximum open time). Potlife is shorter at higher temperatures.
Waiting Time / Overcoating:
- For overcoating with cementitious materials, allow the second coat to harden for at least 3 days prior to overcoating.
- For overcoating with non-cementitious materials, please refer to our Technical Service Department.
Application Steps:
Step 1 :
Whilst the substrate is still damp, apply the first coat. Leave to harden for approximately 4-8 hours at temperatures above 20°C before applying the second coat.
- For slurry consistency, apply with a hard plastic bristled brush or broom)
Step 2 : Second coat
If the second coat is applied 12 hours or later, the first coat shall be slightly prewetted, preferably by using a fine spray.
- For floor applications - to avoid risk of damage to the first coat, it is recommended that the second coat be applied after 24 hours.
Step 3 : Finishing
After the second coat has been applied, better finishing can be achieved by rubbing down with a soft, dry sponge.
