SikaShield® P24 MG
Brand : Sika
Product Type : Plastomeric bituminous membrane surfaced with mineral granules and flexible at 0 °C
Compostion : APP modified bitumen + non-woven polyester fabric
Mass per Unit Area : 4.5kg/m² ± 5 %
Packaging :
- Roll width : 1 metre
- Roll length : 10 metres
- Refer to current price list for packaging variations
Product Description:
SikaShield® P24-MG 4.5kg/m² is an APP modified bituminous roof waterproofing membrane with a weight of 4,5 kg/m². It is reinforced with a non-woven polyester fabric and is flexible at 0 °C. The top surface is coated with mineral granules, which allows the permanent exposure to UV radiation. The underside of the product has a burn-off film for easy torch-application.
Usage:
The Product is used as a waterproofing membrane for:
- Terraces and balconies
- Flat or sloping roofs with up to 15% gradient
The Product is used as a:
- Exposed cap sheet in a multi-layer system
Features / Advantages:
- Decorative mineral granules
- Easy to install by torching method
- Fully bonded
- Flexible in cold temperatures
- Good mechanical properties (tensile, tear, shear)
- Can be painted immediately after application
- Tiles can be placed directly onto the membrane
Shelf Life:
- 12 months from the date of production
Storage:
Store in original unopened Syand undamaged packaging in dry conditions and temperatures between +5 °C and +35 °C.
Store in a vertical position.
Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage.
Always refer to packaging.
Application Guide:
System Design
Consider the following when designing the roof system:
The supporting structure must be of sufficient structural strength to support all new and existing layers of the roof build-up.
The complete roof system must be designed to withstand and be secured against wind uplift loadings.
The wind uplift resistance of the adhered roofing assembly is limited by the adhesion strength of the Product to the substrate.
Substrate Condition
The substrate surface must be uniform, firm, smooth and free of any sharp protrusion or burrs, clean, dry, free of grease, laitance, oil, dust and loosely adhering particles.
