SikaTop® Seal-109 MY | Flexible Cementitious Waterproofing (36kg)
Brand : Sika
Product Type : Polymer-modified, flexible, cementitious waterproofing coating
Size : 36kg
Color and Packaging :
- Part A : White Liquid (10kg)
- Part B : Grey Powder (26kg)
- Parts A + B (mixed) : Dark Grey Slurry (36kg set)
Composition : Polymer modified portland cement
Density : 1.7–1.9 kg/l (mixed)
Product Description:
SikaTop® Seal-109 MY is a cementitious, two-part, polymer-modified flexible waterproofing coating. It is applied to concrete and mortar to prevent water infiltration.
Usage:
- Waterproofing
- Sealing of hairline cracks
- Protective coating against aggressive elements such as carbon dioxide (ex.: in concrete repair work), frost and de-icing agents.
- Areas of application:
- Water tanks
- Basements and car parks
- Terraces and balconies
- Bridges
- Retaining walls
- Swimming pools
- RC gutters
- Bathroom floors and walls
- Planter boxes
- Wet rooms (such as kitchens, waste water treatment plants, shower rooms and laundries)
Features / Advantages:
- Good crack bridging capability (up to 1 mm at +20 °C)
- Pre-batched components
- Mixes and applies easily
- Easily applied by roller or brush
- Good adhesion to sound substrates
- Impermeable
- Increased frost and salt resistance
- Decreases carbon dioxide penetration
- Non-toxic, same as cement
- Flexible
- Resistant to freezing and thawing (-10 °C)
- Economical
Shelf Life:
6 months from date of production
Storage Conditions:
Store properly in original, unopened and undamaged sealed packaging, in cool, dry conditions. Keep away from direct sunlight. Protect from rain, condensation and high humidity.
Technical Information:
Tensile Strength : ~0.7 N/mm²
Tensile Adhesion Strength : ~0.8 N/mm²
Permeability of Water Vapour : < 5 m
Capillary Absorption : < 0.1 kg/m². h10^0.5
Permeability to Carbon Dioxide : > 50 m
Application Guide:
Substrate Temperature : +8 °C (min.)
Pot Life : ~30 minutes (at +20 °C) - shorter at higher temperatures
Consumption:
- For bathroom floors, shower are floors and wet kitchen floors:
- minimum 2 coats (~1.0 kg/m² per coat)
- For splash zone areas of wall with tiles (Ex: bathroom wall, shower area wall and wet kitchen wall:
- 1 coat (~1.0–1.5 kg/m² per coat)
- All other areas:
- minimum 2 coats (~1.0 kg/m² per coat)
- For areas subject to high water ingress:
- Apply 3rd coat (at 1.0 kg/m²)
Application Steps:
Step 1 : Mixing
- Mix both parts in a clean container by slowly adding the powder part to the liquid part and stirring with a paddle attached to a slow speed mixer (400-500rpm) until a creamy consistency is reached.
Step 2 : Application
- While substrate is still damp (but no standing water), apply the first coat by brush, broom, roller or squeegee (if surface is flat enough).
- Allow 4-8 hours (at 20°C) for the first coat to cure before applying the following coats in same manner.
- For large areas:
- Apply by spray using a suitable worm type mixer / pump
- For cracks, wall/floor intersections, etc., apply additional stripe coat, as these locations are where movement is most likely to be expected.
Step 3 : Cleaning of Tools
- Clean all tools and application equipment with water immediately after use.
- Hardened material can only be removed mechanically.
